Description
Low Profile Bike Fork Mounts have been designed to be used when a little more clearance is required, ie in a motorhome garage space !!, the bed is usually a fixed height giving you a space with a fixed height !
We have shaved 40mm off the height of our Original giving this Low Profile an incredible Low Height of 20mm from base to Axle Centre. Â At this low height it might not fit your ride….so you need to check what you have for compatibility, have you got a Calliper hanger ? have you got suspension adjustment on the bottom of your fork etc….
This next bit will sound a bit mad, you might need to add a bit of height for clearance on the bike fork, adding a rail will increase the height by 16mm and for additional adjustment you can add an Off-Set plate, adding a further 8mm to the height. Â So adding a Low Profile Fork Mount + Rail + Off-Set Plate you would have a total height from base to axle centre of 44mm which should clear most Bike Forks on the market, this is still 40mm lower when compared with our Original.
Machined from a single billet of 6026 Aluminium and anodised with an exterior grade finish to a thickness of 25 Microns (AA25) and is compatible with all our Fork Mount Inserts.
We have access holes through the top of the Fork Mount to 2 x Recessed holes ready to take our Nord Loc anti vibration washers and A2 Stainless steel button head screws.
As this is a body only you will need to add the correct fork mount inserts which are available separately, unless you already have them.
Note* Fixings not supplied.
Supplied:
- 1 x Black Low Profile Fork Mount Body
Reviews
There are no reviews yet