2 x Fork Mount Inserts 10×100 BMX (GREEN)

Description

Fork Mount Inserts 10×100 allow your existing fork mounts to be re-configured to accommodate BMX bikes or bikes with a 10mm axle.

These inserts fit bikes with a 10mm A/F drop-out or 10mm through axle fork style and a fork internal width of 100mm.

Each Pair of removable inserts fit the correct width of fork and axle diameter.   We have made each pair of Fork Mount Inserts colour coded so you won’t mix them up.

Fork Mount Inserts 10×100 have a 10mm hole for your axle.  There is also an O-ring on each insert which retains them in the fork mount when inserted.

Swapping Inserts Over:

To swap the inserts, just grab each insert, pull with a slight twist and they will just pop out. Fitting the Fork Mount Inserts is the same in reverse, twist and push.

Each Fork Mount body is pre-lubricated and might require a little additional lubrication over time because O-rings don’t like dry surfaces.

So add a set of Fork Mount Inserts 10×100 to your basket and you will be out on your ride before you know it.

Bike Fork Requirements:

•  Fork Internal Width 100mm
• Fork Drop Out or Through Axle 10mm

What you get:

• 2 x 10mm x 100mm (GREEN) Axle/Fork Insert