Description
Fork Mount Inserts 5×100 allow your existing fork mounts to be re-configured to accommodate Road and Mountain Bikes.
These inserts fit bikes with a 9mm drop-out fork style and traditional 5mm skewer axle (the ones with the springs on the end).
Each Pair of removable inserts fit the correct width of fork and axle diameter. We have made each pair of Fork Mount Inserts colour coded so you won’t mix them up.
Fork Mount Inserts 5×100 have a 5mm hole for your skewer axle and a small up-stand for your fork drop out to locate on to. There is also an O-ring on each insert which retains them in the fork mount when inserted.
Swapping Inserts Over:
To swap the inserts, just grab each insert, pull with a slight twist and they will just pop out. Fitting the Fork Mount Inserts is the same in reverse, twist and push.
Each Fork Mount body is pre-lubricated and might require a little additional lubrication over time because O-rings don’t like dry surfaces.
So add a set of Fork Mount Inserts 5×100 to your basket and you will be out on the trails before you know it.
Bike Fork Requirements:
- Drop-out Style Fork Internal Width 100mm
- Fork Drop Out 9mm A/F
- Q/R Quick release skewer axle diameter 5mm
What you get:
- 2 x 5mm x 100mm (PURPLE) Axle/Fork Insert
great fit
Easy to use, nice finish
Do what they say! – beautifully machined….