Fork Mount Inserts 15×110 allow your existing fork mounts to be re-configured to accommodate Mountain Bikes (MTB) Boost with a diameter 15mm axle.
These inserts fit bikes with a 15mm through axle fork and a fork internal width of 110mm.
Each Pair of removable inserts fit the correct width of fork and axle diameter. We have made each pair of Fork Mount Inserts colour coded so you won’t mix them up.
Fork Mount Inserts 15×110 have a 15mm hole for your axle. There is also an O-ring on each insert which retains them in the fork mount when inserted.
Swapping Inserts Over:
To swap the inserts, just grab each insert, pull with a slight twist and they will just pop out. Fitting the Fork Mount Inserts is the same in reverse, twist and push.
Each Fork Mount body is pre-lubricated and might require a little additional lubrication over time because O-rings don’t like dry surfaces.
So add a set of Fork Mount Inserts 15×110 to your basket and you will be out on the trails before you know it.
Bike Fork Requirements:
- Fork Internal Width 110mm
- Through Axle 15mm
What you get:
- 2 x 15mm x 110mm (SILVER) Axle/Fork Insert