Gravel-Bike Fork Mount Low Profile 12x100RF

Description

*Gravel-Bike Fork Mount designed to work with either our Sliding Tray or Extrusion Rails.

Description

This Rail fitting Low Profile Fork Mount 12x100RF, fits Diameter 12mm Axle x Bike Fork internal face width 100mm.

• Supplied with a pair of Orange inserts suitable for 12mm x 100mm Axle and a rail fitting kit.

Height Problems ?

Motorhome garage spaces usually have a fixed height.

• Solution lower the Fork Mount.

Only 20mm from base to axle Centre

We have shaved 40mm off the height of our Original, giving an incredible Low Height of 20mm from base to Axle Centre.

At this low height it might not fit your ride….so check what you have for compatibility:

• Have you got a brake calliper hanger ?
• Have you got suspension adjustment on the bottom of your fork etc….

This next bit will sound a bit mad

You might need to add a bit of height for clearance on the bike fork.

• Adding a rail will increase the height by 16mm
• For additional adjustment you can add an Off-Set plate, adding a further 8mm to the height.

So adding a Low Profile Fork Mount + Rail + Off-Set Plate you would have a total height from base to axle centre of 44mm.  This should clear most Bike Forks on the market and is still 40mm lower when compared with our Original Fork Mount.

Machined from a single billet of 6026 Aluminium and anodised with an exterior grade finish to a thickness of 25 Microns (AA25) and is compatible with all our Fork Mount Inserts.

We have access holes through the top of the Fork Mount to 2 x Recessed holes ready to take our Nord Loc anti vibration washers and A2 Stainless steel button head screws.

Bike Fork Requirements:

• Fork Internal Width 100mm
• Axle diameter 12mm

What you get:

• 1 x Low Profile Fork Mount Body Black Anodised
• 2 x 12mm x 100mm (ORANGE) Axle/Fork Inserts
• 2 x M8 x 16mm Stainless Steel Button Screws
• 2 x M8 Nord Loc locking washers.