Off-Set Mounting Plate for Single and Twin Slot Fork Mount Rails

Description

If you need to mount your steeds close together on either the 600mm single slot rail or 1200mm twin slot rail your going to need one of our off-set plates added to each of you fork mounts, these can be added for 1-4, even 5 bikes if you can fit them in.  These do exactly what it says on the tin, it allows your bikes to be off-set so you can nest them nice and close, There is no right or wrong way to fit them because it all depends on what size your ride is !

We have added a selection of M8 Clearance holes to each plate which gives you infinite positioning possibility’s, straight, angled, depth and sliding adjustment.

We’ve even added some cool laser engraving so you know what inserts to use, just incase you forget 😉

We supply the off-set plate with 2 x M8 x 20mm Stainless button head screws and a couple of washers, these are used to fit your fork mount securely to the off-set plate, what you need next:

If you purchase a surface mount fork mount:

• You will need to buy 1 x Fork Mount Rail Fixing kit for each set up, these are added to the off set plate to secure to the rail.

If you purchase an extrusion rail fitting fork mount:

• This already has the extrusion fitting kit so you don’t need anything else, all you need to do is unscrew the thread from the knobs and re assemble to use on the offset plates

What you get:

• 1 x Off-Set Mounting plate
• 2 x M8 x 16 Stainless Button Head Screws
• 2 x Washer