Our Off-set mounting plate has had an upgrade….. we have added a couple of machined recesses to allow storage of any spare insert set you wish to carry with you. Each recess is the same diameter as our fork mounts so the insert O rings hold the inserts in place, we also added a positive stop so the inserts won’t push all the way through stopping any potential damage to the inserts when re positioning the off set plate.
If you need to mount your steeds close together on either the 600mm single slot rail or 1200mm twin slot rail your going to need one of our off-set plates added to each of you fork mounts, these can be added for 1-4, even 5 bikes if you can fit them in. These do exactly what it says on the tin, it allows your bikes to be off-set so you can nest them nice and close, There is no right or wrong way to fit them because it all depends on what size your ride is !
We have added a selection of M8 Clearance holes to each plate which gives you infinite positioning possibility’s, straight, angled, depth and sliding adjustment.
We supply the off-set plate with 2 x M8 x 20mm Stainless button head screws and a couple of washers, these are used to fit your fork mount securely to the off-set plate, what you need next:
If you purchase a surface mount fork mount:
- You will need to buy 1 x Fork Mount Rail Fixing kit for each set up, these are added to the off set plate to secure to the rail.
If you purchase an extrusion rail fitting fork mount:
- This already has the extrusion fitting kit so you don’t need anything else, all you need to do is unscrew the thread from the knobs and re assemble to use on the offset plates
What you get:
- 1 x Off-Set Mounting plate with added spare insert recess
- 2 x M8 x 16 Stainless Button Head Screws
- 2 x Washer