Description
Fork Mount Inserts 20×100 allow your existing fork mounts to be re-configured to accommodate Mountain Bikes (MTB) Non-Boost with a diameter 20mm axle.
These inserts fit bikes with a 20mm through axle fork and a fork internal width of 100mm.
Each Pair of removable inserts fit the correct width of fork and axle diameter. Β We have made each pair of Fork Mount Inserts colour coded so you wonβt mix them up.
Fork Mount Inserts 20×100 have a 20mm hole for your axle. Β There is also an O-ring on each insert which retains them in the fork mount when inserted.
Swapping Inserts Over:
To swap the inserts, just grab each insert, pull with a slight twist and they will just pop out. Fitting theΒ Fork Mount Inserts is the same in reverse, twist and push.
Each Fork Mount body is pre-lubricated and might require a little additional lubrication over time because O-rings don’t like dry surfaces.
So add a set of Fork Mount Inserts 20×100 to your basket and you will be out on the trails before you know it.
Bike Fork Requirements:
- Β Fork Internal Width 100mm
- Through Axle 20mm
What you get:
- 2 x 20mm x 100mm (BLACK) Axle/Fork Insert
Reviews
There are no reviews yet.