Description
Need a bit more height ? then your going to want to add a pair of these !
Designed to be used between an off-set plate and your fork mount, supplied as a pair which will give you an additional 75mm of height.
One end has an M8 female thread, the other a male M8 thread which screws into your off-set plate, this can be tightened by inserting a 5mm Allen key through the hole halfway up the post to give you the leverage, then add your fork mount to the top and replace the screws used to mount the fork mount to the off-set plate (using the same 5mm Allen key *not supplied*).
This should then allow you to have that extra height to clear bars, brake levers etc…. when nesting bikes close together, if you need more height, just add another pair.
We have added a couple of images showing a fork mount and off-set plate being used with 1 pair & 2 pairs as examples.
*Just remember you will need an off-set mounting plate to be able to use these.
What you get:
- 2 x 75mm long raiser posts, M8 Female thread one end, M8 Male thread the other (1 x Pair)
2 reviews for 75mm Raiser Posts – To be used in conjunction with Off-Set Mounting Plate